Z9/Open Niagara Module

The Z9/Open module (z9open) connects a Niagara station running Enterprise Security to a Z9/Flex host. The station's access-control doors are defined in Enterprise Security as usual; the module uploads them to the host, and downloads credentials, schedules, access rights, and card formats back to Enterprise Security. Access and door events are reported to the host live.

Requirements

• Niagara 4.6, 4.11, or 4.15 with Enterprise Security installed and an access control station configured (doors, readers, and door hardware under the access network).
• A reachable Z9/Flex host (server or cloud) licensed for Z9/Open Niagara controllers.

Getting started

1. Install the z9open module on the station (Workbench Software Manager) and restart the station.
2. Add the Z9OpenService under the station's Services.
3. Register the station as a controller on the Z9/Flex host and take it over. The host connects to the station, pairs, and synchronization begins automatically.

See Z9OpenService for the service's configuration, actions, and operational notes.

Support

For assistance, contact Z9 Security support at support@z9security.com.

Z9/Open Niagara is z9/op=n certified and powered by Z9 Security. Learn more about the Z9/Flex platform at z9flex.com.